Free design software to calculate the ultimate bending moments for composite beams at room temperature according to Eurocode 4 [1.1] (ENV 1994-1-1) and for the ISO fire classes R3O, R6O, R9O, Rl2O and R180 with accordance to the Eurocode 4 [1.2] (ENV 1994-1-2).
Click on the title to download (zip - 2,26 MB)

The software was developed for the predesign of single span portal frames according to Eurocodes 3 [1].
Click on the title to download (zip - 2,97 MB).

ArcelorMittal Composite Bridge.
Preliminary design software for composite road-, railway- and footbridges.
Click on the title to download (zip - 25,7 MB).

Software to avoid the collapse of buildings in seismic situation by simulate the inclusion of rebar - steel reinforcing bars - on the pillars of support (the mechanism of "Soft-Storey ¨). (.zip 29.2 Mb)

Free design software to calculate the ultimate loads for composite columns AF 30/120 at room temperature according to Eurocode 4 [1.1] (ENV 1994-1-1) and for the ISO fire classes R3O, R6O, R9O and Rl2O, with accordance to the Eurocode 4 [1.2] (ENV 1994-1-2).
Click on the title to download (zip - 1,71 MB)

Preliminary design of steel or composite structures according to Eurocode 3 [1] for steel structures and Eurocode 4 [2] for composite structures. No national application document is applied.
Click on the title to download (zip - 2,29 MB)

Free downloadable software to evaluate the temperature development of the gases within a compartment during the course of a fire according to EN 1991-1-2 and corresponding steel temperature according to EN 1993-1-2
Click on the title to download (zip - 3,04 MB)

Design software to analyse and verificate joint configuration and connections in steel structures. The calculation are based on the standards as described in Eurocode 3 Revised Annexe - J.
Click on the title to download (zip - 14,2 MB)

Software developed for the design according to Eurocode 3 of slimfloor slabs based on Integrated Floor Beam (IFB) sections, which are composed from a split-up wide-flange section and a plate welded as bottom or top flange. It is only possible to calculate simple beams that are hinged at the two supports. It is possible to design also Slim Floor Beam (SFB) sections which are obtained from a complete wide-flange section welded to a plate as support for the slab elements.
Click on the title to download 8zip - 6,55 MB)

Free downloadable software for the design and calculations of composite beams and non composite beams according to Eurocodes [1 to 5]. The application range is limited to statically determinate beams on two simple supports, with or without cantilevers at the ends. The composite beam is composed of a rolled section which may be partially encased in concrete, and of a reinforced concrete slab connected to the upper face of the section. Replaces PMX.
Click on the title to download (zip - 12,1 MB)

Preliminary Sheet Pile design software for cantilever and anchored wall systems according to the Blum theory. The ProSheet 2.2 integrates all the forces required for a preliminary design of a sheet piling structure.
Click on the title to download (zip - 1,77 MB).

A lexicon of 4 000 technical terms used in steel construction in nine languages: Deutsch - English - Español - Français - Italiano - Nederlands - Português - Suomi - Svenska

Free downloadable software for the design of composite columns, composed of steel profiles, concrete and rebars, according to Eurocode 4 [1.1] (ENV 1994-1-1). The program considerates only Double-T profiles. The concrete section consists of an complete encasement of rectangular or circular shape or of a filling of the chambers of the profiles (partly encased profiles). The accepted loadings consist of an axial force and moments in both main directions, which can be applied at the top and/or the bottom of the column. The program calculates these columns according to EC 4, 4.8. For steel grades S420 and S460 the user can decide if the correction according to annex H shall be considered. The calculated columns are always double-symmetric and present the same section throughout the whole height oft the column. Replaces CDD. Click on the title to download (zip - 1,7MB)

Free downloadable software for the preliminary design of composite or non composite cellular beams according to Eurocodes [1,2, 3]. The application range is limited to simply supported beams, with or without a composite slab. The beams are fabricated from I-shape hot-rolled profiles and the openings are circular. The upper chord and the lower chord may be different base profiles and different steel grades.
Click on the title to download (zip - 12,6 MB)

Dwg files are compatible with AutoCAD 2005 and above. Refer to the section headed "Delivery conditions" in the sheet piling catalogue for information on tolerances and maximum fabrication length.
Click on the title to download (zip - 3,1 MB).

Refer to the section headed "Delivery conditions" in the sheet piling catalogue for information on tolerances and maximum fabrication length.
Click on the title to download (zip - 2,2 MB).