Subscribe to our newsleter
Free Design Software
rfq rfq

Pflaum rock wool panel type FOM

Pflaum FOM panels are composite elements with an insulation core of mineral wool.  

The visible joint creates shadows and therefor visual effects on the building's facade, different surface pattern enforce these special aesthetics. Panel width possible up to 50 mm.


Panel Structure:
External and Internal Cover Shell: Galvanised steel 0.50/0.55/0.60/0.75 mm according to EN 10147 (275g/m2 zinc). Stainless steel 0,5 mm on request.

Insulation core: Mineral fibre strands bonded transversely to the steel surfaces, waterrepellent and non-flammable, class A1. Density ≥ 140 kg/m3.

Sealing tape:
For tongue and groove joint, depending on fire resistance classification. (Please contact our technical department for further information)

Surfaces: Corrosion protection class according to KIII / E-DIN 55928 part 8.

External and internal: Polyester-coating 25 microns or PVF2-coating 80/20, Kynar 500 approx. 25 microns. Plastisol and special coating on request.

Internal: Polyester-coating 15 microns or Hard-PVC-foil-coating150 microns.

Colours on stock: Only available for steel 0,60 with polyester-coating. RAL 9002, RAL 9006, RAL 9007, RAL 9010, RAL 1015, RAL 7035;
Surface Protection: Elements are delivered with a protection foil on the exterior surface.

Cover Widths: 600, 915 and 1000 mm
Special Widths: 700, 800, 900 mm
Lengths: Lengths are available up to 14,500 mm, depending on element thickness.
Note: Due to the surface contours you have to add 3 mm to the standard thickness from 35 to 250 mm for panels of type LD, VD, MD and WD. (e.g. type FO-WD/0/100 = 103 mm).

Certificates Serien F:
National approvals, examination certificates and attestations are available on request. Requirements concerning fire resistance class must be quoted on your inquiry.

Tolerances: Quality assurance according to RAL-GZ617.

Powered by aware